Matatar tacewa ta atomatik mai hana zubewa
✧ Bayanin Samfura
Sabon nau'in matsewar tacewa ne mai farantin tacewa mai ruɓewa da kuma rack mai ƙarfi.
Akwai nau'ikan injin tacewa guda biyu: PP Plate Recessed Filter Press da Membrane Plate Recessed Filter Press.
Bayan an danna farantin matattarar, za a rufe ɗakunan don guje wa zubar ruwa da wari yayin tacewa da fitar da kek.
Ana amfani da shi sosai a fannin magungunan kashe kwari, sinadarai, sinadarin acid mai ƙarfi/alkali/lalata da kuma masana'antun da ke da saurin canzawa, da sauransu.
✧ Siffofin Samfura
A,Matsin tacewa:0.6Mpa----1.0Mpa----1.3Mpa-----1.6mpa (don zaɓi)
B,Zafin tacewa:45℃/ zafin ɗaki; 80℃/ zafin jiki mai yawa; 100℃/ Babban zafin jiki. Rabon kayan da aka yi amfani da su a cikin faranti daban-daban na tacewa ba iri ɗaya ba ne, kuma kauri na faranti na tacewa ba iri ɗaya ba ne.
C,Hanyar fitar da ruwa - crasaflow:A ƙarƙashin ƙarshen ciyarwar matsewar tacewa, akwai manyan bututu guda biyu na magudanar ruwa, waɗanda aka haɗa su da tankin dawo da tacewa. Idan ana buƙatar dawo da ruwan, ko kuma idan ruwan yana da ƙarfi, yana da wari, yana iya kamawa da wuta, kuma yana fashewa, kwararar ruwa ta kusa ta fi kyau.
D-1,Zaɓin kayan zane mai tacewa: pH na ruwan yana ƙayyade kayan da za a saka a cikin zanen. PH1-5 zane ne na matattarar polyester mai acidic, PH8-14 zane ne na matattarar polypropylene mai alkaline. Ana fifita ruwan da ke da ƙazanta ko mai ƙarfi don zaɓar zane mai tacewa, kuma ruwan da ba mai ƙazanta ko mai ƙarfi shine zane mai tacewa mara ƙazanta.
D-2,Zaɓin ragar zane mai tacewa: An raba ruwan, kuma an zaɓi lambar raga mai dacewa don girman barbashi daban-daban. Rangwamen zane na matattara raga 100-1000. Canzawa tsakanin Micron zuwa raga (1UM = raga 15,000--a ka'ida).
E,Maganin saman rack:Idan PH ya yi daidai da tushen acid mai rauni ko kuma ƙasa da ƙasa, sai a fara fesa saman fitilar matsewa ta hanyar yashi, sannan a fesa da fenti mai hana tsatsa. Idan ƙimar PH ta kasance mai ƙarfi ko alkaline mai ƙarfi, sai a fesa saman firam ɗin matsewa ta hanyar yashi, a fesa da faranti, sannan a naɗe da ƙarfe mai bakin ƙarfe ko farantin PP.
F,Wanke kek ɗin tacewa: Idan ana buƙatar a dawo da daskararrun abubuwa, kek ɗin tacewa yana da ƙarfi mai tsami ko alkaline; Idan ana buƙatar a wanke kek ɗin tacewa da ruwa, da fatan za a aika imel don tambaya game da hanyar wankewa.
G,Zaɓin famfon ciyar da matattara:Rabon ruwa mai ƙarfi, acidity, zafin jiki da halayen ruwan sun bambanta, don haka ana buƙatar famfunan ciyarwa daban-daban. Da fatan za a aika imel don tambaya.
✧ Tsarin Ciyarwa
✧ Masana'antun Aikace-aikace
Ana amfani da shi sosai a cikin tsarin raba ruwa mai ƙarfi a cikin man fetur, sinadarai, rini, ƙarfe, kantin magani, abinci, wanke kwal, gishirin da ba na halitta ba, barasa, sinadarai, ƙarfe, kantin magani, masana'antu masu sauƙi, kwal, abinci, yadi, kare muhalli, makamashi da sauran masana'antu.
✧ Umarnin Yin Umarnin Tace Matsa
1. Duba jagorar zaɓin matattara, taƙaitaccen bayanin matattara, ƙayyadaddun bayanai da samfura, zaɓisamfurin da kayan tallafi bisa ga buƙatun.
Misali: Ko an wanke kek ɗin tacewa ko a'a, ko tacewa a buɗe take (ana ganin kwararar) ko a rufe take (ba a gani ba),ko rakin yana da juriya ga tsatsa ko a'a, dole ne a ƙayyade yanayin aiki, da sauransu, a cikinkwangila.
2. Dangane da buƙatun musamman na abokan ciniki, kamfaninmu zai iya tsarawa da samarwasamfura marasa daidaito ko samfuran da aka keɓance.
3. Hotunan samfurin da aka bayar a cikin wannan takardar don amfani ne kawai. Idan akwai canje-canje, munaba zai bayar da wani sanarwa ba kuma ainihin umarnin zai yi nasara.
✧ Bukatun amfani da na'urar tacewa
1. Dangane da buƙatun tsari don haɗa bututun mai, da kuma yin gwajin shigar ruwa, gano matsewar iskar bututun;
2. Don haɗa wutar lantarki mai shigowa (mataki na 3 + tsaka tsaki), ya fi kyau a yi amfani da wayar ƙasa don kabad ɗin sarrafa wutar lantarki;
3. Haɗi tsakanin kabad ɗin sarrafawa da kayan aikin da ke kewaye. An haɗa wasu wayoyi. An yi wa tashoshin layin fitarwa na kabad ɗin sarrafawa lakabi. Duba zane-zanen da'ira don duba wayoyi kuma a haɗa su. Idan akwai wani sassauƙa a cikin tashar da aka gyara, sake matsewa;
4. Cika tashar hydraulic da man hydraulic mai lamba 46 #, ya kamata a ga man hydraulic a tagar lura da tanki. Idan matatar tacewa tana aiki akai-akai na tsawon awanni 240, a maye gurbin ko a tace man hydraulic;
5. Shigar da ma'aunin matsin lamba na silinda. Yi amfani da makulli don guje wa juyawa da hannu yayin shigarwa. Yi amfani da zoben O a haɗin da ke tsakanin ma'aunin matsin lamba da silinda mai;
6. A karo na farko da silinda mai ke aiki, ya kamata a juya injin tashar hydraulic a hannun agogo (wanda aka nuna a kan injin). Lokacin da aka tura silinda mai gaba, tushen ma'aunin matsin lamba ya kamata ya fitar da iska, kuma silinda mai ya kamata a maimaita tura shi gaba da baya (matsin lamba na sama na ma'aunin matsin lamba shine 10Mpa) kuma a fitar da iska a lokaci guda;
7. Matsewar tacewa tana aiki a karon farko, zaɓi yanayin da hannu na kabad ɗin sarrafawa don gudanar da ayyuka daban-daban bi da bi; Bayan ayyukan sun zama na yau da kullun, zaku iya zaɓar yanayin atomatik;
8. Shigar da zanen tacewa. A lokacin gwajin aikin matse matatar, ya kamata a sanya farantin tacewa da zanen tacewa a gaba. Sanya zanen tacewa a kan farantin tacewa don tabbatar da cewa zanen tacewa ya yi lebur kuma babu wani ƙura ko haɗuwa. A tura farantin tacewa da hannu don tabbatar da cewa zanen tacewa ya yi lebur.
9. A lokacin aikin injin tacewa, idan hatsari ya faru, mai aiki zai danna maɓallin dakatarwa na gaggawa ko kuma ya ja igiyar gaggawa;
✧Manyan kurakurai da hanyoyin magance matsala
| Lalacewar da ta faru | Ka'idar Laifi | Shirya matsala |
| Amo mai tsanani ko matsin lamba mara ƙarfi a cikin tsarin hydraulic | 1. Famfon mai babu komai a ciki ko kuma bututun tsotsar mai ya toshe. | Mai da tankin mai, magance matsalar fitar da bututun tsotsa |
| 2, An kama saman rufewar farantin matatar da nau'ikan daban-daban. | Tsaftace saman rufewa | |
| 3, Iska a cikin da'irar mai | Iskar shaye-shaye | |
| 4, Famfon mai ya lalace ko ya lalace | Sauya ko gyara | |
| 5, Bawul ɗin taimako ba shi da ƙarfi | Sauya ko gyara | |
| 6. Girgizar bututu | Ƙarfafawa ko ƙarfafawa | |
| Rashin isasshen ko babu matsi a cikin tsarin hydraulic | 1. Lalacewar famfon mai | Sauya ko gyara |
| sake daidaitawa | |
| 3, Danko mai ya yi ƙasa sosai | Sauya mai | |
| 4. Akwai ɗigon ruwa a cikin tsarin famfon mai | Gyara bayan jarrabawa | |
| Rashin isasshen matsin lamba na silinda yayin matsi | 1, Bawul ɗin taimako mai matsin lamba mai lalacewa ko makale | Sauya ko gyara |
| 2, Bawul ɗin juyawa mai lalacewa | Sauya ko gyara | |
| 3, Babban hatimin piston da ya lalace | maye gurbin | |
| 4, ƙaramin hatimin piston "0" da ya lalace | maye gurbin | |
| 5, Famfon mai da ya lalace | Sauya ko gyara | |
| 6, An daidaita matsin lamba ba daidai ba | sake daidaita | |
| Rashin isasshen matsin lamba na silinda lokacin dawowa | 1, Bawul ɗin taimako mai sauƙi ko lalacewa | Sauya ko gyara |
| 2, Hatimin ƙaramin piston da ya lalace | maye gurbin | |
| 3, ƙaramin hatimin piston "0" da ya lalace | maye gurbin | |
| Rarrafe na piston | Iska a cikin da'irar mai | Sauya ko gyara |
| Hayaniyar watsawa mai tsanani | 1. Lalacewar da aka samu | maye gurbin |
| 2. Yin amfani da kayan aiki ko kuma yin amfani da su | Sauya ko gyara | |
| Babban malalar ruwa tsakanin faranti da firam |
| maye gurbin |
| 2, Ɓarna a saman rufewa | Tsafta | |
| 3、Tace zane tare da naɗewa, overlaps, da sauransu. | An cancanta don kammalawa ko maye gurbin | |
| 4, Rashin ƙarfin matsawa | Ƙara ƙarfin matsi mai dacewa | |
| Farantin da firam ɗin sun karye ko kuma sun lalace | 1, Matsin tacewa yayi yawa | rage matsin lamba |
| 2, Babban zafin jiki na kayan abu | Yanayin zafi ya ragu yadda ya kamata | |
| 3, Ƙarfin matsi ya yi yawa | Daidaita ƙarfin matsi yadda ya kamata | |
| 4, Tacewa da sauri sosai | Rage yawan tacewa | |
| 5, Ramin abinci mai toshewa | Tsaftace ramin ciyarwa | |
| 6, Tsayawa a tsakiyar tacewa | Kada ka tsaya a tsakiyar tacewa | |
| Tsarin sake cikawa yana aiki akai-akai | 1, Bawul ɗin duba na'urar sarrafa ruwa ba a rufe shi sosai ba | maye gurbin |
| 2. Zubar da ruwa a cikin silinda | Sauya hatimin silinda | |
| Lalacewar bawul ɗin juyawa na hydraulic | Spool ya makale ko ya lalace | Watsewa da tsaftace ko maye gurbin bawul ɗin da aka saba |
| Ba za a iya ja da keken ba saboda tasirin baya da gaba. | 1, Ƙarancin matsin lamba na mai a cikin injin mai | daidaita |
| 2, Matsi mai matsin lamba yana da ƙasa | daidaita | |
| Rashin bin ƙa'idodi | Rashin wani ɓangare na tsarin hydraulic, tsarin lantarki | Gyara ko maye gurbin ta hanyar alamun bayyanar cututtuka bayan dubawa |
| Lalacewar diaphragm | 1, rashin isasshen matsin lamba na iska | Rage matsin lamba |
| 2, Rashin isasshen abinci | Matsewa bayan cika ɗakin da kayan aiki | |
| 3. Wani abu na waje ya huda diaphragm. | cire kayan ƙasashen waje | |
| Lanƙwasa lalacewar babban katako | 1. Tushen da ba shi da kyau ko mara kyau | Gyara ko sake gyara |
Kayayyaki masu alaƙa
-
Manhajar Matatar Mai Lanƙwasa Mai Lanƙwasa Ta atomatik Don fil ɗin ruwan sharar gida...
✧ Siffofin Samfura A、Matsalar tacewa: 0.6Mpa—-1.0Mpa—-1.3Mpa—–1.6mpa (don zaɓi) B、Zafin tacewa：45℃/ zafin ɗaki; 80℃/ zafin jiki mai yawa; 100℃/ Babban zafin jiki. Rabon kayan da aka yi amfani da su na faranti daban-daban na tacewa ba iri ɗaya ba ne, kuma kauri na faranti na tacewa ba iri ɗaya ba ne. C-1、Hanyar fitarwa - buɗewar kwarara: Ana buƙatar sanya famfo a ƙasan gefen hagu da dama na kowane farantin tacewa, da kuma wurin wankewa mai dacewa. Op...
-
Ƙaramin Injin Tace Na'ura Mai Lantarki 450 630...
-
Ƙarfin lalata slurry tacewa tace latsa
✧ Keɓancewa Za mu iya keɓance mashinan tacewa bisa ga buƙatun masu amfani, kamar rack ɗin za a iya naɗe shi da bakin ƙarfe, farantin PP, robobi masu feshi, don masana'antu na musamman waɗanda ke da tsatsa ko matakin abinci mai ƙarfi, ko buƙatu na musamman don giya ta musamman kamar mai canzawa, mai guba, wari mai ban haushi ko mai lalata, da sauransu. Barka da zuwa aiko mana da cikakkun buƙatunku. Hakanan za mu iya samar da famfon ciyarwa, jigilar bel, murfin karɓar ruwa, tsarin wanke ruwa na zane, laka...
-
Matsi na matattarar diaphragm tare da na'urar ɗaukar bel don w...
✧ Siffofin Samfura Kayan aiki masu dacewa da matattarar tacewa ta diaphragm: Mai jigilar bel, murfin karɓar ruwa, tsarin wanke ruwan tacewa, hopper na adana laka, da sauransu. A-1. Matsin tacewa: 0.8Mpa; 1.0Mpa; 1.3Mpa; 1.6Mpa. (Zaɓi) A-2. Matsin kek ɗin matsewa ta diaphragm: 1.0Mpa; 1.3Mpa; 1.6Mpa. (Zaɓi) B、Zafin tacewa：45℃/ zafin ɗaki; 65-85℃/ zafin jiki mai yawa. (Zaɓi) C-1. Hanyar fitarwa - buɗewa: Ana buƙatar sanya famfo a ƙasan gefen hagu da dama na ...