Lalacewar najasa mai matsin lamba mai ƙarfi tare da bel ɗin jigilar kek
✧ Siffofin Samfura
Kayan aikin daidaita matattarar tacewa ta diaphragm: Mai jigilar bel, murfin karɓar ruwa, tsarin wanke ruwan zane, hopper na adana laka, da sauransu.
A-1. Matsin tacewa: 0.8Mpa; 1.0Mpa; 1.3Mpa; 1.6Mpa. (Zaɓi ne)
A-2. Matsi na matsi na diaphragm: 1.0Mpa; 1.3Mpa; 1.6Mpa. (Zaɓi ne)
B. Zafin tacewa: 45℃/ zafin ɗaki; 80℃/ zafin jiki mai yawa; 100℃/ Zafin jiki mai yawa.
C-1. Hanyar fitarwa - buɗewa: Ana buƙatar a sanya famfo a ƙasan gefen hagu da dama na kowace farantin tacewa, da kuma wurin wankewa mai dacewa. Ana amfani da buɗewa don ruwa da ba a dawo da su ba.
C-2. Hanyar fitar da ruwa - rufewar kwarara: A ƙarƙashin ƙarshen ciyarwar matsewar tacewa, akwai manyan bututu guda biyu na fitar da kwarara, waɗanda aka haɗa su da tankin dawo da ruwa. Idan ruwan yana buƙatar a dawo da shi, ko kuma idan ruwan yana da ƙarfi, yana da wari, yana iya kamawa da wuta, ana amfani da kwararar duhu.
D-1. Zaɓin kayan zane na tacewa: PH na ruwan yana ƙayyade kayan zane na tacewa. PH1-5 zane ne na tacewa na polyester mai acidic, PH8-14 zane ne na tacewa na polypropylene na alkaline. Ruwan da ke da ƙazanta ko mai ƙarfi ana fifita shi don zaɓar zane na tacewa, kuma ruwan da ba mai ƙazanta ko mai ƙarfi ba shine zane na tacewa mara ƙazanta.
D-2. Zaɓin ragar zane mai tacewa: An raba ruwan, kuma an zaɓi lambar raga mai dacewa don girman barbashi daban-daban. Matsakaicin ragar zane mai tacewa raga 100-1000. Canzawa tsakanin Micron da raga (1UM = raga 15,000--a ka'ida).
E. Maganin saman rack: Matsayin PH tsaka tsaki ko tushe mai rauni na acid; Ana fara fesa saman firam ɗin matsewa na tacewa, sannan a fesa da fenti na primer da anti-corrosion. Matsayin PH shine acid mai ƙarfi ko alkaline mai ƙarfi, saman firam ɗin matsewa na tacewa an fesa shi da yashi, an fesa shi da primer, kuma an naɗe saman da bakin ƙarfe ko farantin PP.
F. Wanke kek ɗin tacewa: Idan ana buƙatar a dawo da sinadarin da ke cikinsa, kek ɗin tacewa yana da ƙarfi sosai na acidic ko alkaline; Idan ana buƙatar a wanke kek ɗin tacewa da ruwa, da fatan za a aika imel don tambaya game da hanyar wankewa.
G. Aikin matsewar matattarar diaphragm: Matsewar Hydraulic ta atomatik; Jawowar Faranti na Tace ta atomatik; Fitar da Kek Mai Girgiza Faranti; Tsarin Wanke Zane na Tace ta atomatik.
H. Zaɓin famfon ciyar da mai tacewa: Rabon ruwa mai ƙarfi, acidity, zafin jiki da halayen ruwan sun bambanta, don haka ana buƙatar famfunan ciyarwa daban-daban. Da fatan za a aika imel don tambaya.
| Jagorar Samfurin Matsa Tace | |||||
| Sunan ruwa | Rabon ruwa mai ƙarfi da ƙarfi(%) | Takamaiman nauyi nadaskararru | Matsayin kayan aiki | Darajar PH | Girman ƙwayar cuta mai ƙarfi(raga) |
| Zafin jiki (℃) | Farfadowaruwa/daskararru | Yawan ruwa nakek ɗin tacewa | Aikiawanni/rana | Ƙarfin aiki/rana | Ko ruwa neyana ƙafewa ko a'a |
✧ Tsarin Ciyarwa
✧ Masana'antun Aikace-aikace
Ana amfani da shi sosai a cikin tsarin raba ruwa mai ƙarfi a cikin man fetur, sinadarai, rini, ƙarfe, kantin magani, abinci, wanke kwal, gishirin da ba na halitta ba, barasa, sinadarai, ƙarfe, kantin magani, masana'antu masu sauƙi, kwal, abinci, yadi, kare muhalli, makamashi da sauran masana'antu.
✧ Umarnin Yin Umarnin Tace Matsa
1. Duba jagorar zaɓin matattara, taƙaitaccen bayanin matattara, ƙayyadaddun bayanai da samfura, zaɓisamfurin da kayan tallafi bisa ga buƙatun.
Misali: Ko an wanke kek ɗin tacewa ko a'a, ko ruwan da ke cikinsa a buɗe yake ko a rufe yake,ko rakin yana da juriya ga tsatsa ko a'a, dole ne a ƙayyade yanayin aiki, da sauransu, a cikinkwangila.
2. Dangane da buƙatun musamman na abokan ciniki, kamfaninmu zai iya tsarawa da samarwasamfura marasa daidaito ko samfuran da aka keɓance.
3. Hotunan samfurin da aka bayar a cikin wannan takardar don amfani ne kawai. Idan akwai canje-canje, munaba zai bayar da wani sanarwa ba kuma ainihin umarnin zai yi nasara.
✧ Matsa Tace Matattarar Atomatik
✧ Bidiyo
Kayayyaki masu alaƙa
-
Leaf ɗin Matsi na De-Wax ta atomatik…
✧ Siffofin Samfura Matatar jerin JYBL galibi ta ƙunshi ɓangaren jikin tanki, na'urar ɗagawa, na'urar girgiza, allon tacewa, bakin fitar da slag, nunin matsin lamba da sauran sassa. Ana tura matatar cikin tanki ta bututun shiga kuma a cika ta da, ƙarƙashin matsin lamba, allon tacewa yana katse ƙazanta masu ƙarfi kuma ana samar da kek ɗin tacewa, matatar tana kwarara daga tanki ta bututun fitarwa, don samun matatar mai tsabta. ✧ Siffofin Samfura 1. An yi raga da tabo...
-
Mai Kaya da Injin Matse Tace ta atomatik
✧ Siffofin Samfura A、Matsalar tacewa: 0.6Mpa—-1.0Mpa—-1.3Mpa—–1.6mpa (don zaɓi) B、Zafin tacewa：45℃/ zafin ɗaki; 80℃/ zafin jiki mai yawa; 100℃/ Babban zafin jiki. Rabon kayan da aka yi amfani da su na faranti daban-daban na tacewa ba iri ɗaya ba ne, kuma kauri na faranti na tacewa ba iri ɗaya ba ne. C-1、Hanyar fitarwa - buɗewar kwarara: Ana buƙatar sanya famfo a ƙasan gefen hagu da dama na kowane farantin tacewa, da kuma wurin wankewa mai dacewa. Op...
-
Ƙaramin Injin Tace Na'ura Mai Lantarki 450 630...