Akwai samfura da yawa naMatatun kwandowaɗanda suka dace da masana'antu daban-daban, don haka lokacin zabar matatun kwando, ya kamata mu kula da ko ainihin buƙatun aikin da samfurin matatun kwandon sun dace, musamman matakin ragar kwandon tacewa, kayan aiki, diamita na shiga da fita, matsin lamba, da sauransu.
1. Ramin kwandon tacewa yana ƙayyade girman ƙwayoyin da ke buƙatar toshewa, wanda ke da tasiri mai mahimmanci akan tsaftar tacewa.
2. Kayan matatun kwando sun haɗa da ƙarfen carbon, SS304, SS316L, duplex SS2205, da sauransu. Ya zama dole a yi la'akari da halayen kayan da aka yi amfani da su da kuma juriyar tsatsa na kayan, da sauransu.
3. A ka'ida, diamita na shigarwa da fitarwa na matattarar kwandon yakamata ya zama daidai da diamita na shigarwa na famfon da ya dace.
4. Ya kamata a tantance matakin matsin lamba na matatar kwandon bisa ga matsin lamba mafi girma da ke faruwa a bututun tacewa.
Za mu iya keɓance nau'ikan matatun kwando iri-iri bisa ga buƙatun mai amfani. Haka nan za mu iya samar da su.Matatun kwandon duplex.
| Saitin Matsi na Aiki | Matatar tsaro: 0.3MPA (Matsayin Zane 0.6MPA) Matatun jaka na al'ada: 0.6MPA (Matsayin Zane 1.0MPA) Matatar jakar matsi mai ƙarfi: 1.0MPA (Matsayin ƙira 1.6MPA) |
| Kayan gidan tacewa | Karfe mai carbon, SS304, SS316, duplex SS2205 |
| Maganin saman | Zane, Fasawa Yashi, Gyaran Madubi |
| Kayan zoben rufewa | NBR, Gel ɗin Silica, Rubber Fluoro, PTFE |
| Matsayin flange | HG, ANSI B16.5, BS4504, DIN, JIS |
| Diamita na fitar da ruwa ta hanyar shiga | DN25/DN32/DN40/DN50/DN65/DN80/DN100 /DN125/DN150/DN200/DN250/DN300.... |
Lokacin Saƙo: Afrilu-24-2024