Karamin Manual Jack Filter Press Matsakaici Dace don Masana'antar Haɓaka Kayan Kayan Kayan Ganye na Gargajiya ta China

a.Matsin tacewa | 0.5Mpa

b.Zazzabi na tacewa: 45 ℃ / dakin zafin jiki;80 ℃ / high zafin jiki;100 ℃/ Yawan zafin jiki.Matsakaicin ɗanyen abu na daban-daban na samar da zazzabi mai tace faranti ba iri ɗaya bane, kuma kaurin faranti ba iri ɗaya bane.

c-1.Hanyar zubar da ruwa - buɗaɗɗen ruwa: Ana buƙatar shigar da famfo a ƙasan gefen hagu da dama na kowane farantin tacewa, da madaidaicin nutsewa.Ana amfani da buɗaɗɗen kwarara don ruwa waɗanda ba a dawo dasu ba.

c-2.Hanyar fitar da ruwa kusa da kwarara: A ƙarƙashin ƙarshen ciyarwar latsa tace, akwai manyan bututun fitarwa guda biyu na kusa, waɗanda ke da alaƙa da tankin dawo da ruwa.Idan ruwan yana buƙatar dawo da ruwa, ko kuma idan ruwan yana da ƙarfi, ƙamshi, mai ƙonewa da fashewa, ana amfani da kwararar duhu.

d-1.Zaɓin kayan zane mai tacewa: pH na ruwa yana ƙayyade kayan kayan tacewa.PH1-5 shine zane mai tace polyester acidic, PH8-14 shine zanen tace polypropylene alkaline.An fi son ruwa mai ɗanɗano ko ƙaƙƙarfan don zaɓar rigar tace twill, kuma ruwan da ba shi da ɗanɗano ko ƙaƙƙarfan zaɓaɓɓen zanen tacewa.

d-2.Zaɓin ragamar rigar tacewa: Ruwan ya rabu, kuma an zaɓi lambar raga madaidaicin don nau'ikan ƙwararrun ƙwanƙwasa daban-daban.Tace ragar raga 100-1000 raga.Micron zuwa canjin raga (1UM = 15,000 raga --- cikin ka'idar).

e.Rack surface jiyya: PH darajar tsaka tsaki ko rauni acid tushe;An buge saman firam ɗin tace yashi da farko, sannan a fesa shi da fenti da fenti.Ƙimar PH tana da ƙarfi acid ko alkaline mai ƙarfi, saman firam ɗin matattarar matattara ya zama yashi, an fesa shi da firam, kuma an nannade saman da bakin karfe ko farantin PP.

Tsarin ciyarwa

Aikace-aikace Masana'antu

Man fetur, sinadarai, magunguna, sukari, abinci, wankin kwal, mai, bugu da rini, sana'a, tukwane, karafa, ma'adinai, najasa da sauran fannoni.

Tace aikin latsawa

1. Dangane da buƙatun tsari don yin haɗin bututun, da yin gwajin shigar ruwa, gano ƙarancin iska na bututun.

2. Don haɗin haɗin shigar da wutar lantarki (3 lokaci + tsaka tsaki), ya fi kyau a yi amfani da waya ta ƙasa don majalisar kula da wutar lantarki.

3. Haɗin kai tsakanin majalisar kulawa da kayan aiki da ke kewaye.An haɗa wasu wayoyi.Ana lakafta tashoshin layin fitarwa na majalisar sarrafawa.Koma zuwa zanen da'ira don duba wayoyi da haɗa shi.Idan akwai wani sako-sako a cikin kafaffen tasha, sake damfara.

4. Cika tashar hydraulic tare da mai 46 # hydraulic, mai ya kamata a gani a cikin taga kallon tanki.Idan matattarar tacewa tana ci gaba da aiki har tsawon awanni 240, maye gurbin ko tace man hydraulic.

5. Shigar da silinda matsa lamba ma'auni.Yi amfani da maƙarƙashiya don guje wa jujjuyawar hannu yayin shigarwa.Yi amfani da zoben O a haɗin tsakanin ma'aunin ma'aunin da silinda mai.

6. A karo na farko da silinda mai ke gudana, motar tashar hydraulic ya kamata a jujjuya agogon agogo (an nuna akan motar).Lokacin da aka tura silinda mai gaba, ma'aunin ma'aunin ma'aunin ya kamata ya fitar da iska, kuma silindar mai yakamata a sake tura shi gaba da baya (matsayin iyakar iyakar ma'aunin ma'aunin shine 10Mpa) kuma yakamata a fitar da iska lokaci guda.

7. Latsawar tace yana gudana a karon farko, zaɓi yanayin hukuma na hukuma don gudanar da ayyuka daban-daban;Bayan ayyukan sun kasance na al'ada, zaku iya zaɓar yanayin atomatik.

8. Sanya kayan tacewa.Yayin aikin gwaji na latsa tacewa, farantin tace ya kamata a sanye shi da zane mai tacewa a gaba.Sanya rigar tacewa akan farantin tacewa don tabbatar da cewa rigar tacewa tayi lebur kuma babu magudanar ruwa ko matsowa.Tura farantin tacewa da hannu don tabbatar da cewa rigar tace a kwance.

9. Lokacin aiki na latsa tace, idan wani hatsari ya faru, mai aiki yana danna maɓallin dakatar da gaggawa ko ya ja igiyar gaggawa.